HP HPE VAN SDN Controller 2.7 - Using Evaluation Licenses

Figure 63 Review transferred license status screens
To register the transferred licenses on the new controller, see “Activating a license on the
controller” (page 92).
Using Evaluation Licenses
To use evaluation licenses:
1. Install the HPE VAN SDN Controller and install all the Hewlett Packard Enterprise SDN
applications you would like to evaluate. If you are using the Hewlett Packard Enterprise SDN
App Store, install the Trial Mode SDN applications.
2. Go to the My Networking portal (MNP) at http://www.hpe.com/networking/mynetworking).
3. Under Licenses, select Register License.
4. From the menu on the right of the screen, select SDN Evaluation Licenses.
5. Enter the HPE VAN SDN Controller installation identifier (install-id).
6. The My Networking portal generates every evaluation license possible for that install-id.
7. Apply the relevant evaluation licenses to the controller and applications.
98 License Registration and Activation