5-32 Functional Information
EN
Variable Fusing Temperature
Figure 5-19 Fusing Temperature Control
Variable Fusing Temperature is a feature that gives the user or
service technician the ability to adjust the fusing temperature based
on the media being used in the printer. The default mode is Normal
and should be optimal for most users. There is an optional Low and
High Fuser Mode selection. If very heavy or rough media is being
used, then High Fuser Mode is beneficial. If transparencies or light
media are being used, then Low Fuser Mode might be appropriate.
CONFIGURE FUSER MODE is in the Paper Handling Menu and when set
to the default of NO, paper types are not displayed in the menu. When
CONFIGURE FUSER MODE is set to YES, the different paper types are
then displayed in the menu.
To Next Page
Loading...