HP LaserJet 4000 - Paper Feed Rollers

6-48 Removing and Replacing Parts
EN
Paper Feed Rollers
The following procedure is the same for all HP LaserJet 4000 series
printers; there are 2 feed rollers for the HP LaserJet 4000 T and
4000 TN and one feed roller for the HP LaserJet 4000 and 4000 N.
Figure 6-45 Removing the Paper Feed Rollers (HP LaserJet 4000 T/4000 TN
Shown)
1. Remove the tray(s) from the Feeder. The Paper Feed Rollers are
inside the Feeder.
2. Pinch the release at the left side of the roller and slide it off the
shaft.