EN
Control Panel Menus
3-13
Printing Menu
Some items in this menu can be accessed from a software
application, or from the printer driver (if the appropriate driver is
installed). Printer driver and software application settings override
Control Panel settings.
Table 3-7. Printing Menu
Item Values Explanation
COPIES=1 1 to 999
Set the default number of
copies by selecting any
number from 1 to 999. Press
[-Value+]
once to change
the setting by increments of 1,
or hold down
[-Value+]
to
scroll by increments of 10.
Note
It is best to set the number of
copies from the printer driver
or software application. (Driver
and software settings override
Control Panel settings.)
PAPER=
LETTER
(110V printers)
and
ENVELOPE=
COM10
(110V printers)
For supported paper sizes see
page 1-9.
Set the default image size for
paper and envelopes. (The
item name will change from
paper to envelope as you
scroll through the available
sizes.)
Note
The defaults indicated here
are for 110V printers. The
default paper size for 220V
printers is
A4
. The default
envelope size for 220V
printers is
DL
.
CONFIGURE CUSTOM
PAPER=NO
NO
YES
NO:
The custom paper menu
items are not accessible.
YES:
The custom paper menu
items appear (see the next
item).
To Next Page
Loading...