1-16 Printer Description
EN
Envelopes
Envelope Construction
Envelope construction is critical. Envelope fold lines can vary
considerably, not only between manufacturers, but also within a box
from the same manufacturer. Successful printing on envelopes
depends upon the quality of the envelopes. When selecting
envelopes, consider the following components:
z
Weight: The weight of the envelope paper should not exceed
28 lb (105 g/m
2
), or jamming may result.
z
Construction: Prior to printing, envelopes should lie flat with less
than 0.25 in (6 mm) curl, and should not contain air. (Envelopes
that trap air may cause problems.)
z
Condition: Make sure envelopes are not wrinkled, nicked, or
otherwise damaged.
z
Sizes in Tray 1: From 3 by 5 inches (76 by 127 mm) to 8.5 by 14
inches (216 by 356 mm).
z
Sizes in the optional envelope feeder: From 3.5 by 6.3 in
(90 by 160 mm) to 7 by 10 in (178 by 254 mm).
If you do not have an optional envelope feeder, always print
envelopes from Tray 1. If envelopes wrinkle, try opening the rear
output bin.
To Next Page
Loading...