HP LaserJet 4000 - Paper Feed Module Side Rails

6-52 Removing and Replacing Parts
EN
Paper Feed Module Side Rails
Remove the Paper Feed Module Side Rails to access the PCA
Controller. This procedure is the same for one 500-sheet tray or two
250-sheet trays.
Figure 6-49 Removing the Paper Feed Module Side Rails (HP LaserJet
4000 T/4000 TN shown)
1. To remove the side rails, remove the 4 recessed screws (1 is
long).
2. Unplug the connector.
3. Lift the side rails off of the Paper Feed Module.
Unplug
connector
(Long
screw)