3-28 Printer Operation
EN
Resets Menu
Use this menu with caution. You can lose buffered page data or
printer configuration settings when you select these items. Only reset
the printer under the following circumstances:
z You want to restore the printer’s default settings.
z Communication between the printer and computer has been
interrupted.
z You are using both the serial and parallel I/O ports, and one of the
ports is having problems.
The items in the Resets Menu will clear all memory in the printer,
while [Cancel Job] clears only the current job.
Table 3-11. Resets Menu
Item Explanation
RESET MEMORY
This item clears the printer buffer and the active
I/O input buffer, and makes the Control Panel
defaults current.
The
DATA RECEIVED
message might display on
the Control Panel.
Resetting memory during a print job can result in
data loss.
RESTORE FACTORY SETTINGS
This item performs a simple reset and restores
most of the factory (default) settings. This item
also clears the input buffer for the active I/O.
The
DATA RECEIVED
message might display on
the printer’s Control Panel.
RESET ACTIVE I/O CHANNEL
This item performs a simple reset and clears the
input and output buffers (for the active I/Os only).
The
DATA RECEIVED
message might display on
the printer’s Control Panel.
RESET ALL I/O CHANNELS
This item performs a simple reset and clears the
input and output buffers for all I/Os.
To Next Page
Loading...