7-24 Troubleshooting
EN
RAM DISK DEVICE
FAILURE
The RAM disk had a
critical failure and can no
longer be used.
1. Turn the printer off, and
then turn the printer on to
clear the message.
2. If the message persists,
install a new RAM disk.
RAM DISK FILE
OPERATION FAILED
The requested operation
could not be performed.
You might have
attempted an illegal
operation, such as trying
to download a file to a
non-existent directory.
1. Check the filename and
directory name.
2. Reattempt the
operation.
RAM DISK FILE
SYSTEM IS FULL
The RAM disk is full. 1. Delete files and then try
again, or turn the printer
off, and then turn the
printer on to delete all files
on the device. (Delete files
using HP JetAdmin,
HP FontSmart, or another
software utility. See the
software help for more
information.)
2. If the message persists,
increase the size of the
RAM disk. Change the
RAM disk size from the
Configuration Menu in the
printer’s Control Panel.
RAM DISK IS
WRITE PROTECTED
The RAM disk is
protected, and no new
files can be written to it.
Disable the write
protection through
HP JetAdmin.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action
To Next Page
Loading...