HP LaserJet 4000 - Page 227

EN
Troubleshooting the Printing System
7-33
41.3 UNEXPECTED
PAPER SIZE
The paper size you are
trying to print is not the
same as the settings for
the tray.
1. Make sure that all trays
are correctly adjusted for
size. (The printer will
continue trying to print
the job until size settings
are correct.)
If you are trying to print
from Tray 1, make sure
the printer’s Control Panel
setting for paper size is
correctly configured.
If you are trying to print
from the optional universal
500 sheet tray, be sure to
set the paper size dial to
match the paper size
loaded in the tray.
2. After performing the
actions above, press
[Go]
. The page
containing the error will
automatically be
reprinted. (Or, you might
want to press
[Cancel Job]
to clear
the job from the printer’s
memory.)
41.x
PRINTER ERROR
alternates with
PRESS GO TO
CONTINUE
A temporary printing error
occurred.
X Description
1 Unknown misprint error.
2 Beam detect misprint
error.
3 See error 41.3 above.
4 No VSYNC error.
5 Media feed error.
9 Noise VSREQ error.
Press
[Go]
. The page
containing the error will
automatically be
reprinted.
If the error persists:
1. Reseat the
connections to the Laser
Scanner and the Engine
Controller Board.
2. Replace the Laser
Scanner
3. Replace the Engine
Controller Board.
Table 7-6. Numerical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action