7-44 Troubleshooting
EN
Paper Path Test
To perform a Paper Path Test:
1. Press [Menu] until INFORMATION MENU appears
2. Press [Item] until PRINT PAPER PATH TEST appears.
3. Press [Select].
4. Press [+] to cycle selections until the desired paper tray appears.
5. Press [Select].
6. Press [+] until the desired output bin appears (open the rear
output bin to print to it)
7. Press [Select].
8. Press [+] until the desired duplex mode (on or off) appears.
9. Press [Select].
10. Press [+] to cycle selections until the desired number of copies
appears. Choose 1, 10, 50, 100, or 500 copies.
11. Press [Select] to perform the Paper Path Test.
To Next Page
Loading...