7-62 Troubleshooting
EN
Table 7-24. Loose Toner
Possible Cause Action
Dirt in the printer. 1. Print a few more pages to see if the problem
corrects itself.
2. Clean the inside of the printer (page 4-2) or use
the printer’s cleaning page (page 4-4).
Toner Cartridge is
defective.
Replace the Toner Cartridge.
Paper might be too
smooth.
Check the paper (or other print media) type and
quality.
Wrong Fuser setting
for paper type.
From the Paper Handling Menu on the Control
Panel, change the Fuser Mode setting or choose
another paper type from the printer driver.
Defective Fuser. Replace the Fuser.
Table 7-25. Repetitive Defects
Possible Cause Action
Dirt or defect on a
roller.
See “Repetitive Defect Ruler” on page 7-66.
To Next Page
Loading...