HP LaserJet 4000 - Page 51

EN
Control Panel Menus
3-9
OVERRIDE A4 WITH
LETTER=NO
NO
YES
Choose
YES
to print on letter size
paper when an A4 job is sent, but no
A4 size paper is loaded in the printer
(or to print on A4 size paper when a
letter job is sent, but no letter paper
is loaded in the printer).
CONFIGURE FUSER MODE
MENU=NO
NO
YES
Configure the fuser mode associated
with each paper type. (This is only
necessary if you are experiencing
problems printing on certain paper
types.)
NO
:
The fuser mode menu items are
not accessible.
YES
:
Additional items appear (see
below).
Note
To see the default fuser mode for
each paper type, select
YES
, scroll
back to the Information Menu, and
print a menu map (page 3-6).
[TYPE]=
NORMAL
NORMAL
LOW
HIGH
This item appears only when
CONFIGURE FUSER MODE
MENU=YES
. Most paper types are set
to
NORMAL
by default.
The exception is as follows:
ROUGH=HIGH
(The
ROUGH=HIGH
setting is only
available with A4, letter, and legal
sizes.)
For a complete list of supported paper
types, see page 1-9.
Table 3-5. Paper Handling Menu (continued)
Item Values Explanation