HP LaserJet P2030 series User Manual

Image defect examples
This section provides information about identifying and correcting print defects.
NOTE: If these steps do not correct the problem, contact an HP-authorized dealer or service representative.
Light print or faded
●
The print cartridge is nearing end of life.
●
Redistribute the toner to extend the life.
●
The media might not meet HP's media specications (for
example, the media is too moist or too rough).
●
If the whole page is light, the print density adjustment is too
light or EconoMode might be turned on. Adjust the print
density, and disable EconoMode in the printer Properties.
Toner specks
●
The media might not meet HP's media specications (for
example, the media is too moist or too rough).
●
The printer might need to be cleaned.
●
The print cartridge might be defective.
Dropouts
●
A single sheet of media might be defective. Try reprinting
the job
.
●
The media moisture content is uneven or the media has
mois
t s
po
ts on its surface. Try printing with new media.
●
The media lot is bad. The manufacturing processes can
cause some ar
e
as t
o reject toner. Try a dierent type or
brand of media.
●
The print cartridge might be defective.
94 Chapter 10 Solve problems ENWW

HP LaserJet P2030 series Specifications

General

Print Technology	Laser
Print Speed	Up to 30 ppm
Monthly Duty Cycle	Up to 25, 000 pages
First Page Out	As fast as 8 seconds
Internal Memory	16 MB
Processor Frequency	266 MHz
Standard Connectivity	Hi-Speed USB 2.0
Input Capacity	250 sheets
Media Sizes Supported	envelopes
Warm-up Time	8 seconds from Ready
Supported Operating Systems	Windows, Mac OS, Linux
Weight	10.0 kg
Print Resolution	Up to 1200 x 1200 dpi
Output Capacity	150-sheet output bin