Clean the Tray 2 pickup roller
If the product is having trouble picking up paper from Tray 2, follow these instructions.
1. Turn the product o, disconnect the power cord and wait for the product to cool.
2. Remove Tray 2.
3. Inside the empt
y tray slot, locate the pickup roller on the top side, near the front of the product.
4. Dab a lint-free cloth in water, and then scrub the roller as you rotate it toward the back of the product.
NOTE: Do not touch the surface of the roller with bare ngers.
ENWW Clean the product 71
To Next Page
Loading...
