HP LaserJet P2030 series User Manual

Replace supplies and parts
Supply replacement guidelines
Keep the following guidelines in mind when setting up the product.
●
Sucient space is required above and in the front of the product for removing supplies.
●
The product should be located on a at, sturdy surface.
NOTE: HP recommends the use of HP supplies in this product. Use of non-HP supplies can cause problems
requiring service that is not covered by the HP warranty or service agreements.
Redistribute toner
When toner is low, faded or light areas appear on the printed page. You might be able to temporarily improve
print quality by redistributing the toner.
1. Push the button to open the print-cartridge door, and then remove the print cartridge.
2
. T
o redistribute the toner, gently rock the print cartridge from front to back.
CAUTION: If toner gets on your clothing, wipe it o with a dry cloth and wash the clothing in cold water.
Hot water sets toner into the fabric.
ENWW Replace supplies and parts 61

HP LaserJet P2030 series Specifications

General

Print Technology	Laser
Print Speed	Up to 30 ppm
Monthly Duty Cycle	Up to 25, 000 pages
First Page Out	As fast as 8 seconds
Internal Memory	16 MB
Processor Frequency	266 MHz
Standard Connectivity	Hi-Speed USB 2.0
Input Capacity	250 sheets
Media Sizes Supported	envelopes
Warm-up Time	8 seconds from Ready
Supported Operating Systems	Windows, Mac OS, Linux
Weight	10.0 kg
Print Resolution	Up to 1200 x 1200 dpi
Output Capacity	150-sheet output bin