HP LaserJet P2030 series User Manual

Special paper or print media guidelines
This product supports printing on special media. Use the following guidelines to obtain satisfactory results.
When using special paper or print media, be sure to set the type and size in your print driver to obtain the best
print results.
CAUTION: HP LaserJet printers use fusers to bond dry toner particles to the paper in very precise dots. HP
laser paper is designed to withstand this extreme heat. Using inkjet paper not designed for this technology
could damage your printer.
Media type Do Do not
Envelopes
●
Store envelopes at.
●
Use envelopes where the seam
extends all the way to the corner of
the envelope.
●
Use peel-o adhesive strips that are
approved for use in laser printers.
●
Do not use envelopes that are
wrinkled, nicked, stuck together, or
otherwise damaged.
●
Do not use envelopes that have
clasps, snaps, windows, or coated
linings.
●
Do not use self-stick adhesives or
other synthetic materials.
Labels
●
Use only labels that have no exposed
backing between them.
●
Use Labels that lie at.
●
Use only full sheets of labels.
●
Do not use labels that have wrinkles
or bubbles, or are damaged.
●
Do not print partial sheets of labels.
Transparencies
●
Use only transparencies that are
approved for use in laser printers.
●
Place transparencies on a at surface
after removing them from the
product.
●
Do not use transparent print media
not approved for laser printers.
Letterhead or preprinted forms
●
Use only letterhead or forms
approved for use in laser printers.
●
Do not use raised or metallic
letterhead.
Heavy paper
●
Use only heavy paper that is
approved for use in laser printers and
meets the weight specications for
this product.
●
Do not use paper that is heavier than
the recommended media
specication for this product unless it
is HP paper that has been approved
for use in this product.
Glossy or coated paper
●
Use only glossy or coated paper that
is approved for use in laser printers.
●
Do not use glossy or coated paper
designed for use in inkjet products.
ENWW Special paper or print media guidelines 35

HP LaserJet P2030 series Specifications

General

Print Technology	Laser
Print Speed	Up to 30 ppm
Monthly Duty Cycle	Up to 25, 000 pages
First Page Out	As fast as 8 seconds
Internal Memory	16 MB
Processor Frequency	266 MHz
Standard Connectivity	Hi-Speed USB 2.0
Input Capacity	250 sheets
Media Sizes Supported	envelopes
Warm-up Time	8 seconds from Ready
Supported Operating Systems	Windows, Mac OS, Linux
Weight	10.0 kg
Print Resolution	Up to 1200 x 1200 dpi
Output Capacity	150-sheet output bin