HP LaserJet P2030 series - Status-Light Patterns

Status-light patterns
Table 10-1 Status-light legend
Symbol for "light o"
Symbol for "light on"
Symbol for "light blinking"
Table 10-
2
Control-panel light messages
Light status State of the printer Action
Initialization/Startup
While in the Startup state, the Go, Ready,
and Att
ention lights cycle (at the rate of
500 ms) one after another.
Reconguration Initialization
During the printer start up, you can request
special initialization sequenc
es that
recongure the printer. When one of the
sequences is requested, such as cold reset,
the lights cycle as in the Initialization/
Startup state.
Job Cancel
After the cancellation process has been
complet
ed, the printer returns to the Ready
state.
During the Initialization, Reconguration,
and Job Cancel processes, pressing buttons
has no eect.
76 Chapter 10 Solve problems ENWW