HP LaserJet P2030 series User Manual

Table 5-4 IP addressing (continued)
Service name Description
BOOTP (bootstrap protocol) For Automatic IP address assignment. BOOTP server provides the
product with an IP address. Requires administrator to input the
product MAC hardware address on BOOTP server in order for
product to obtain an IP address from that server.
Auto IP For Automatic IP address assignment. If neither a DHCP server nor
a BOOTP server is present, this service allows the product to
generate a unique IP address.
Install the product on a network
In this conguration, the product is connected directly to the network and can be congured to allow all
computers on the network to print directly to the product.
NOTE: This mode is the recommended network conguration for the product.
1. Before turning on the product, connect the product directly to the network by inserting a network cable
into the product network port.
2. Turn on the product, wait 2 minutes, and then use the control panel to print a conguration page.
NOTE: Make sure that an IP address is listed on the conguration page before proceeding to the next
step. If an IP address is not present, reprint the conguration page.
3. Insert the product CD into the computer. If the software installer does not start, navigate to the
setup.exe le on the CD and double-click the le.
4. Follow the installer instructions.
NOTE: When the installer prompts for a network address, provide the IP address listed on the
conguration page that you printed before starting the installer program, or search for the product on
the network.
5. Allow the installation process to complete.
Congure the network product
View or change network settings
You can use the embedded Web server to view or change IP conguration settings.
1. Print a conguration page, and locate the IP address.
●
If you are using IPv4, the IP address contains only digits. It has this format:
xx.xx.xx.xxx
●
If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It has
this format:
26 Chapter 5 Connectivity ENWW

HP LaserJet P2030 series Specifications

General

Print Technology	Laser
Print Speed	Up to 30 ppm
Monthly Duty Cycle	Up to 25, 000 pages
First Page Out	As fast as 8 seconds
Internal Memory	16 MB
Processor Frequency	266 MHz
Standard Connectivity	Hi-Speed USB 2.0
Input Capacity	250 sheets
Media Sizes Supported	envelopes
Warm-up Time	8 seconds from Ready
Supported Operating Systems	Windows, Mac OS, Linux
Weight	10.0 kg
Print Resolution	Up to 1200 x 1200 dpi
Output Capacity	150-sheet output bin