A print job was not sent to the product that you wanted.
Cause Solution
The print queue might be stopped. Restart the print queue. Open print monitor and select Start
Jobs.
The wrong product name or IP address is being used. Another
product with the same or similar name, IP address, or Rendezvous
host name might have received your print job.
Check the product name, IP address, or Rendezvous host name by
printing a conguration page. See Print the information pages
on page 56. Verify that the name, IP address, or Rendezvous host
name on the conguration page matches the product name, IP
address, or Rendezvous host name in the Print Center.
An encapsulated PostScript (EPS) le does not print with the correct fonts.
Cause Solution
This problem occurs with some programs.
●
Try downloading the fonts that are contained in the EPS le
to the product before printing.
●
Send the le in ASCII format instead of binary encoding.
You are unable to print from a third-party USB card.
Cause Solution
This error occurs when the software for USB devices is not
installed.
When adding a third-party USB card, you might need the Apple
USB Adapter Card Support software. The most current version of
this software is available from the Apple Web site.
ENWW Solve common Macintosh problems 103
To Next Page
Loading...
