3. Grasp both sides of the print cartridge and distribute the toner by gently rocking the print cartridge.
CAUTION: Do not touch the shutter or the surface of the roller.
4. Bend the tab on the le
ft side of the cartridge until the tab breaks loose. Pull the tab until all the tape is
removed from the cartridge. Place the tab and tape in the print-cartridge box to return for recycling.
5. Align the print cartridge with the tracks inside the product, insert the print cartridge until it is rmly
se
ated, and then close the print-cartridge door.
6. Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See
the encl
osed recycling guide for recycling instructions.
For additional help, go to
www.hp.com/support/ljp2030series.
ENWW Replace supplies and parts 63
To Next Page
Loading...
