HP NonStop SSH Reference Manual SSHCOM Command Reference • 133
SSHCOM Command Reference
SSHCOM Overview
SSHCOM is a command interpreter delivered with the SSH2 component. It is used to view and maintain the SSH2 user
database. Using SSHCOM is similar to working with the HP PATHCOM utility. You connect to an existing SSH2
process using the OPEN command, then you issue commands against that instance of SSH2, which will access the
corresponding area in the database. Please see section "Overview of SSH Operation Modes" for an explanation for the
logical separation of those database entities that are related to outgoing connections (client mode entities) and database
entities that are related to incoming connections.
SSHCOM is started with a simple TACL command. After switching to the proper mode (see "Overview of SSH
Operation Modes" in the chapter "The SSH User Database"), the HELP command will give you a brief overview of the
supported commands. Note that the HELP command will result in a different output in the two modes. The following
example shows the output in client mode:
$US SSH92 31> run sshcom $ssh00
SSHCOM T0801H01_20JUL2012_ABC
OPEN $ssh00
% mode client
mode client
OK, switched to client mode
% help
help
+-----------------------Main Menu-------SSHCOM CLIENT Mode--------------------+
| |
| Client Mode Commands: |
| ===================== |
| |
| Commands operating on KEY entity: |
| --------------------------------- |
| ALTER DELETE EXPORT FREEZE |
| GENERATE IMPORT INFO RENAME |
| THAW |
| |
| Commands operating on KNOWNHOST entity: |
| --------------------------------------- |
| ADD ALTER DELETE FREEZE |
| INFO RENAME THAW |
| |
| Commands operating on PASSWORD entity: |
| --------------------------------------- |
| ADD ALTER DELETE FREEZE |
| INFO RENAME THAW |
| |
| General Commands |
| ---------------------- |
| INFO SSH2 INFO SYSTEM-USER |
| |
| Miscellaneous Commands |
| ---------------------- |
To Next Page
Loading...
