242 • STN Reference HP NonStop SSH Reference Manual
Note: For services with LOGON REQ, the STN15 and STN16 messages prompt for a userid and password. If either of
these prompts is not answered within 60 seconds, the session is terminated with an STN54 error message. This timeout
always is in effect regardless of INPUT_TIMEOUT or BANNER_TIMEOUT.
KILL_DYNAMIC Y|N
If set to "Y", when a dynamic window session is disconnected, the dynamically started process is stopped. Only a
process directly started by STN would be stopped; descendant processes are not affected. Default is "N".
LICENSE <location>
Note: PTY delivered with NonStop SSH does not require a license. Starting with T0801^AAQ, a license for SSH is no
longer required either.
LISTOPENS
Displays one line for each OPEN of the application by another process. Example output lines:
1. G083I process.term [cpu,pin] fnum userid programfile home [backup]
2. $TCP1.#W742 1,47 fn=6 id=20,33 $SYSTEM.SYSTEM.PATHTCP $TERM4 bak=2,52 fn=6
3. \CENTDIV.01,050.#COMMAND.COMMAND fn=3 id=255,255 $SYSTEM.SYSTEM.STNCOM $OSP
These three example output lines represent the following:
1. Title line
2. Indicates that:
The named process $TCP1 (cpu,pin=1,47) has opened the STN window with a terminal name of #W742 as file
number 6.
$TCP1's process access ID is group,user=20,33
$TCP1's object program file name is $SYSTEM.SYSTEM.PATHTCP
$TCP1's home terminal is $TERM4
$TCP1's backup process (cpu,pin=2,52) has checkopened the STN window with file number 6
3. Indicates that:
The unnamed process running on node \CENTDIV with cpu,pin=1,50 has opened the STN window with
terminal name #COMMAND.COMMAND as file number 3.
The #COMMAND.COMMAND terminal name indicates a STNCOM requester.
The program is running under group,user=255,255 (SUPER.SUPER) from object program file name
$SYSTEM.SYSTEM.STNCOM with home terminal $OSP.
Note that the LISTOPENS command can generate a very long response.
MAX_OPENERS <n>
Defines the maximum application openers of a window. <n> may be in the range 1-64 and defaults to 32. Any open
attempts beyond the maximum will be rejected with feopenstop 61. This feature prevents an ill-behaved application from
monopolizing STN resources.
To Next Page
Loading...
Need help?
General