72 • Configuring and Running SSH2 HP NonStop SSH Reference Manual
• Section "Single Sign-on with GSSAPI Authentication".
GUARDIANATTRIBUTESEPARATOR
The value (which should only consist of one character) is used as additional separator character between Guardian file
name and Guardian file attributes.
Use this parameter to specify additional separator character between Guardian file name and Guardian file attributes. The
standard separator is always supported.
Parameter Syntax
GUARDIANATTRIBUTESEPARATOR separator
Arguments
separator
The character to be allowed as a separator of Guardian file attributes.
Considerations
• Use this parameter if a SFTP client does not support using commas in remote filenames.
• The configured separator character does not replace the default (which is comma) but is an alternate.
• Either the configured separator or the standard separator (comma) is supported but not a mix of both.
Default
If omitted, the only separator character is the comma.
Examples
GUARDIANATTRIBUTESEPARATOR -
GUARDIANATTRIBUTESEPARATOR "&"
HOSTKEY
Use this parameter to specify the filename of the host key file.
Parameter Syntax
HOSTKEY filename
Arguments
filename
Specifies the name of the host key file.
Considerations
• The host key is the private key that is used to authenticate the host against the clients. The fingerprint of the host
key will need to be configured on the remote systems that connect to the SSH2 process running on the NonStop
system. The fingerprint of the host key file is displayed during startup of the process.
• In order to prevent unauthorized usage of the host key file (i.e. moving it to other systems), the file is stored in a
proprietary format and encrypted. The host key file is secured as "----".
• The customer name configured via parameter CUSTOMER or, if that does not exist, the customer name held
within the license file for the SSH2 program is used as an input for host-based key encryption. When you plan
to duplicate the host key and user database onto other NonStop systems (such as a disaster recovery system),
you need to make sure the parameter CUSTOMER or the license file of that other system has the same customer
To Next Page
Loading...
Need help?
General