HP NonStop SSH 544701-014 User Manual

HP NonStop SSH Reference Manual STN Reference • 225
ADD SERVICE S123,SCRIPT NOECHO …
ADD SERVICE
The ADD SERVICE command defines a new service for STATIC and DYNAMIC window sessions. The service will be
available to sessions on any LISTENER, as well as on SSH pseudo TTYs, if the CI-COMMAND *MENU* is set for the
user as follows:
ADD SERVICE service-name
,TYPE DYNAMIC | STATIC
,PROG program-file-name
,CPU (cpunum | cpunum-cpunum | ANY)
,PRI priority
,TERM_TYPE TN6530 | ANSI | ANY
,MODE BLOCK | CONV
,MENU HIDDEN | VISIBLE
,LIB lib-file-name
,SWAP $volume-name
,USER (groupnum,usernum) | groupname.username
,PARAM "param-text"
,IPRANGE iprange-name
,HOME home-terminal-name
,LIMIT max-sessions
,RESILIENT YES | NO
,DEBUGOPT OFF | <number>
,LOGAUDIT YES | NO
,LOGON REQ | NONE
,SCRIPT script-name
The service-name and the TYPE field are required; all others are optional.
TYPE DYNAMIC STATIC
CPU optional not allowed
DEBUGOPT optional not allowed
HOME optional not allowed
LIB optional not allowed
LIMIT optional not allowed
LOGON optional not allowed
PARAM optional not allowed
PRI optional not allowed
PROG required not allowed
RESILIENT optional not allowed
SWAP optional not allowed
USER optional not allowed
IPRANGE optional optional
LOGAUDIT optional optional

HP NonStop SSH 544701-014 Specifications

General

Brand	HP
Model	NonStop SSH 544701-014
Category	Software
Language	English