HP NonStop SSH Reference Manual STN Reference • 235
• INPUT_TIMEOUT, IDLE_WARNING
BLAST <message>
BLAST <message> sends a broadcast to all active sessions.
<message> is limited to 54 characters of displayable ASCII (hex 20-7e). The text will be prefixed with BEL ESC o (hex
07 1b 6f) which will sound the audible beep and place the text on Line 25 for 6530 terminals.
This command should only be used for urgent messages since it can interrupt normal terminal activity.
BREAK_ON_DISCON Y|N
If this parameter is set to "Y", when a dynamic window session is disconnected, and there are no active I/O operations
(e.g. WRITEREAD), a BREAK is simulated. No BREAK is sent if there is an active I/O. Default is "N".
BUFFER_SIZE
BUFFER_SIZE displays the size of internal STN buffers, which is useful in configuring STN memory via PARAM
POOL^SIZE.
The BUFFER_SIZE command has no parameter.
CHOICE_PROMPT Y | N
This command controls display of "Enter Choice> " prompt after service name list. This is independent of BANNER
Y|N.
CHOICE_TEXT <text>
Allows changing the "Enter Choice" message.
CONN_CLR_SSH Y | N
CONN_CLR_SSH controls clearing of the screen at connect time for SSH 6530 sessions. The clear occurs immediately
before the STN00 message, which is after SSH BANNER and before STN WELCOME displays. Default is N, which is
recommended with SSH BANNER Y, and is different from STN A91 and earlier. The current setting is displayed by
INFO STN.
DELETE IPRANGE <iprange-name> | *
Deletes a specific IPRANGE or all IPRANGEs.
The IPRANGE is immediately deleted. If any SERVICEs refer to this IPRANGE, then those services will reject any new
connection attempts until a subsequent ADD IPRANGE is done. In this case a warning is displayed in response to the
DELETE IPRANGE command:
IPRANGE <name> deleted - Warning: 1 SERVICE(s) still reference this iprange
DELETE SCRIPT <script-name> | *
The specified script, or all scripts, can be removed from the configuration.
To Next Page
Loading...
Need help?
General