38 • Installation & Quick Start HP NonStop SSH Reference Manual
[def ] LOGLEVELCONSOLE <50>
[def ] LOGLEVELEMS <20>
[def ] LOGLEVELFILE <50>
[def ] LOGMAXFILELENGTH <20000>
[def ] LOGMEMORYDETAILED <0>
[def ] MACS <hmac-sha1,hmac-md5,hmac-sha1-96,hmac-md5-96>
[def ] PARTIALSSHCOMACCESSGROUP1 <>
[def ] PARTIALSSHCOMACCESSUSER1 <>
[run ] PORT <55022>
[def ] PTCPIPFILTERKEY <*>
[def ] PTYSERVER <$PTY>
[def ] RECORDDELIMITER <LF>
[def ] RESTRICTIONCHECKFAILEDDEFAULT <FALSE>
[def ] SFTPALLOWGUARDIANCD <FALSE>
[def ] SFTPCPUSET <>
[def ] SFTPEDITLINEMODE <none>
[def ] SFTPEDITLINENUMBERDECIMALINCR <1000>
[def ] SFTPEDITLINESTARTDECIMALINCR <-1>
[def ] SFTPEXCLUSIONMODEREAD <SHARED>
[def ] SFTPIDLETIMEOUT <-1>
[def ] SFTPMAXEXTENTS <900>
[def ] SFTPPRIMARYEXTENTSIZE <2>
[def ] SFTPSECONDARYEXTENTSIZE <100>
[def ] SFTPUPSHIFTGUARDIANFILENAMES <FALSE>
[def ] SOCKETKEEPALIVE <1>
[def ] SOCKETRCVBUF <0>
[def ] SOCKETSNDBUF <0>
[def ] SOCKTCPMAXRXMT <0>
[def ] SOCKTCPMINRXMT <0>
[def ] SOCKTCPRXMTCNT <0>
[def ] SOCKTCPTOTRXMTVAL <0>
[def ] SSHAUTOKEXBYTES <1073741824>
[def ] SSHAUTOKEXTIME <3600>
[def ] SSHCTL <SSHCTL>
[def ] SSHCTLAUDIT <TRUE>
[def ] SSHKEEPALIVETIME <60>
[def ] STOREDPASSWORDSONLY <FALSE>
[def ] STRICTHOSTKEYCHECKING <TRUE>
[run ] SUBNET <$ZTC1>
[def ] SUPPRESSCOMMENTINSSHVERSION <FALSE>
[def ] TCPIPHOSTFILE <*>
[def ] TCPIPNODEFILE <*>
[def ] TCPIPRESOLVERNAME <*>
$SSH55|26Mar12 21:01:54.81|10|CRYPTOPP version T9999H06_03Mar2012_comForte_CRYPTOPP_0023
$SSH55|26Mar12 21:01:54.84|10|SSH config database SSHCTL opened.
$SSH55|26Mar12 21:01:54.85|20|parameter SUBNET was evaluated
$SSH55|26Mar12 21:01:54.85|20|DEFINE =TCPIP^PROCESS^NAME was set to <\NPNS01.$ZTC1>
$SSH55|26Mar12 21:01:54.85|20|TCP/IP process is $ZTC1
$SSH55|26Mar12 21:01:55.04|20|DEFINE =SSH2^PROCESS^NAME was set to <\NPNS01.$SSH55>
$SSH55|26Mar12 21:01:55.04|10|Initializing SSH2 ADMIN run mode.
$SSH55|26Mar12 21:01:55.05|10|Initializing SSH2 CLIENT run mode.
$SSH55|26Mar12 21:01:55.05|10|Initializing SSH2 DAEMON run mode.
$SSH55|26Mar12 21:01:55.22|10|Loading private key from HOSTKEY
$SSH55|26Mar12 21:01:55.39|30|Host key algorithm: ssh-dss
$SSH55|26Mar12 21:01:55.39|30|Host key MD5 fingerprint: 87:33:4c:98:3e:a4:
Secure Shell Access to the NonStop Server
Note: This functionality is not enabled if you purchased a license restricted to file transfer ("HP NonStop SSH –
SecureFTP" or "comForte SecurFTP/SSH").
SSH2 allows remote SSH clients to establish fully functional OSS shell sessions. SSH2 will also support the allocation
of pseudo terminals (PTYs), which allow the remote users to execute full screen applications, such as vi or Emacs.
To Open an OSS Shell Using a Remote SSH Client
Note: This functionality requires OSS to be installed and running on your system.
After the STN and SSH2 processes have started successfully, you can now connect using an SSH client on a remote
system. In the SSH command, you have to specify the Guardian userid and the IP address or host name that SSH2 is
listening on:
m.horst@np-dev02:~> ssh comf.mh@10.0.0.199
The authenticity of host '10.0.0.199 (10.0.0.199)' can't be established.
DSA key fingerprint is 26:b8:77:fb:2f:22:81:3b:f6:44:4f:19:66:67:9a:be.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.0.0.199' (DSA) to the list of known hosts.
To Next Page
Loading...
Need help?
General