66 • Configuring and Running SSH2 HP NonStop SSH Reference Manual
CONFIG
Use this parameter to specify a configuration file for an SSH2 process.
Parameter Syntax
CONFIG file
Arguments
file
Specifies the name of the configuration file.
Default
If omitted, SSH2 will not use a configuration file.
Example
CONFIG $DATA1.SSH2.SSHCONF
Considerations
• This parameter can only be specified as PARAM or on the startup line. It is not valid within a configuration file.
• Parameters specified in the configuration file can be overwritten by PARAM or startup line settings.
CONFIG2
Use this parameter to specify a second configuration file for an SSH2 process.
Parameter Syntax
CONFIG2 file2
Arguments
file2
Specifies the name of the second configuration file.
Default
If omitted, SSH2 will not use a second configuration file.
Example
CONFIG2 $DATA1.SSH2.SSHCONF2
Considerations
• The second configuration file has precedence over the first one.
• This parameter can only be specified as PARAM or on the startup line. It is not valid within a configuration file.
• Parameters specified in the configuration file can be overwritten by PARAM or startup line settings.
CPUSET
This parameter allows configuring the default set of CPUs the SSH2 process starts non-SFTPSERV user processes in.
Parameter Syntax
CPUSET cpu-set
To Next Page
Loading...
