HP NonStop SSH Reference Manual Preface • 17
Version 3.8
Describes changes in SSH2 release 90.
Documentation for the following new features has been added:
• Added description for new parameters ENABLESTATISTICSATSTARTUP, INTERFACEOUT,
LOGEMSKEEPCOLLECTOROPENED, LIFECYCLEPOLICYPRIVATEUSERKEY,
INTERVALPENDINGPRIVATEUSERKEY and INTERVALLIVEPRIVATEUSERKEY.
• Added description for new host key related SSHCOM commands INFO HOST-KEY, EXPORT HOST-KEY
• Modified description for SSHCOM client mode commands ALTER KEY, GENERATE KEY, IMPORT KEY
and INFO KEY
• Added description for new statistics related SSHCOM command STATISTICS SESSION
• Added description of new audit event SftpServerFatalErrorEvent
• Added section “FILE I/O parameters for SFTP/SFTPOSS”
• Enhanced section " Installation on the NonStop Server"
• Added an example for “Forwarding Remote Port to Local Port” in section "To Establish a Port Forwarding
Tunnel with the NonStop SSH Client"
Changes in SSH2 release 90 that are incompatible with previous releases:
• In previous releases the value for INTERFACE had not been used for outgoing connections, i.e. if a TCP/IP
process defined several subnets, then it was undetermined, which of the local IP addresses was used when
connecting to remote systems. Now the IP address configured via INTERFACEOUT is used or, if that is not
set, the value of parameter INTERFACE determines the local IP address selected for outgoing connections. The
previous behavior can be activated by setting the new parameter INTERFACEOUT to value 0.0.0.0.
• The output of SSHCOM command INFO KEY has changed: The brief information contains the life-cycle state
(header LIFE-CYCLE) instead of the LAST-MODIFIED field.
Version 3.7
Describes changes in SSH2 release 89.
Documentation for the following new features has been added:
• Description for SSH2 parameters ALLOWFROZENSYSTEMUSER, CLIENTMODEOWNERPOLICY and
SUPPRESSCOMMENTINSSHVERSION have been added.
• Description for parameter RECORDDELIMITER now lists newly supported values CR and CRLF.
• Added description for new SSH/SFTP Client parameters SUPPRESSCLIENTBANNER, SSHERRORPREFIX,
SSHINFOPREFIX and SSHQUERYPREFIX.
• Added description for new SSH/SFTP Client options -Z (corresponding to SUPPRESSCLIENTBANNER), -H
(corresponding to SSHERRORPREFIX), -J (corresponding to SSHINFOPREFIX) and -K (corresponding to
SSHQUERYPREFIX).
• Description of the SSH2 database was enhanced.
• Added description for new parameter SFTPEXCLUSIONMODEREAD.
• Added description of new USER attribute ALLOW-MULTIPLE-REMOTE-HOSTS
• Added section about modified behavior if an OBJECTTYPE USER record exists in Safeguard.
• Added section listing all audit messages.
• Added section for SSHCOM client mode commands RENAME KNOWNHOST and RENAME PASSWORD
To Next Page
Loading...
Need help?
General