EasyManua.ls Logo

HP NonStop SSH 544701-014

HP NonStop SSH 544701-014
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HP NonStop SSH Reference Manual SSH and SFTP Client Reference 197
-q Quiet; don't display any warning messages.
-H string Set prefix used for error messages. Default: no prefix.
-J string Set prefix used for info/warning messages. Default: no prefix.
-K string Set prefix used for prompt/query messages. Default: no prefix.
-c ciphers Select encryption algorithms
-m macs Specify MAC algorithms
-p port Connect to this port. Server must be on the same port.
-L listen-port:host:port Forward local port to remote address
-R listen-port:host:port Forward remote port to local address
These cause ssh to listen for connections on a port, and
forward them to the other side by connecting to host:port.
-C Enable compression.
-N Do not execute a shell or command.
-g Allow remote hosts to connect to forwarded ports.
-o 'option' Process the option as if it was read from a configuration file.
-s Invoke command (mandatory) as SSH2 subsystem.
-S process connect using this SSH2 process.
STOPPED: $Z3PT
CPU time: 0:00:00.007
2: Process terminated with fatal errors or diagnostics
Termination Info: 1$US SSH89 5>
General Runtime options
-l user
Specify the user to log in as on the remote machine.
-V
Display version number only, then terminate.
-Z
The banner normally printed by the ssh client is suppressed (line "SSH client version
T9999H06_23Dec2010_comForte_SSH_0089" in the above example). The suppression of the client banner can also be
achieved by specifying a PARAM/environment variable SUPPRESSCLIENTBANNER with possible values 0 for false
and 1 for true (the -Z option takes precedence over the PARAM/environment variable).
-q
Quiet mode: No warning or error messages are printed.
-c ciphers
Specify a comma-separated list of ciphers for encrypting the session. Currently the following ciphers are supported:
aes256-cbc: AES (Rijndael) in CBC mode, with 256-bit key
aes128-cbc: AES with 128-bit key
twofish256-cbc: Twofish in CBC mode, with 256-bit key
twofish128-cbc: Twofish with 128-bit key
twofish-cbc: alias for "twofish256-cbc" (Note: this is being retained for historical reasons)
blowfish-cbc: Blowfish in CBC mode
3des-cbc: three-key 3DES in CBC mode
arcfour: the ARCFOUR stream cipher
cast128-cbc: CAST-128 in CBC mode
If this option is not specified, the client will negotiate a cipher from list configured for the SSH2 server using the
CIPHERS parameter.

Table of Contents

Related product manuals