HP NonStop SSH 544701-014 User Manual

HP NonStop SSH Reference Manual SSH and SFTP Client Reference • 205
Specify how many requests may be outstanding at any one time. Increasing this may slightly improve file transfer speed
but will increase memory usage. The default is 16 outstanding requests.
The number of outstanding requests can also be set by specifying a PARAM/environment variable
SFTPNUMREQUESTS.
-S <SSH2 process name>
This option is used to set the SSH2 process to communicate with. Please refer to the section "Configuring the SSH2
Process to Use" earlier in this chapter.
-Z
The banner normally printed by the ssh client is suppressed (line " SFTPOSS client version
T9999H06_23Dec2010_comForte_SFTPOSS_0089" in the above example). The suppression of the client banner can
also be achieved by specifying a PARAM/environment variable SUPPRESSCLIENTBANNER with possible values 0
for false and 1 for true (the -Z option takes precedence over the PARAM/environment variable).
Runtime options relevant only when automating SFTP client
-H string
Set specific string used as prefix for error messages displayed by the SFTP client during the connection phase. Double
quotes can be used to define strings containing a space or special characters. The prefix for errors can also be specified
via PARAM/environment variable SSHERRORPREFIX (the -H option takes precedence over the PARAM/environment
variable). There is no specific error prefix defined as default.
-J string
Set specific string used as prefix for informational or warning messages displayed by the SFTP client during the
connection phase. Double quotes can be used to define strings containing a space or special characters. The prefix for
infos/warnings can also be specified via PARAM/environment variable SSHINFOPREFIX (the -J option takes
precedence over the PARAM/environment variable). There is no specific info/warning prefix defined as default.
-K string
Set specific string used as prefix for prompt/query messages displayed by the SFTP client during the connection phase.
Double quotes can be used to define strings containing a space or special characters. The prefix for infos/warnings can
also be specified via PARAM/ environment variable SSHQUERYPREFIX (the -K option takes precedence over the
PARAM/environment variable). There is no specific query prefix defined as default.
Runtime Parameters
The following runtime parameters are supported:
User
The user name used to log on to the remote system.
Host
The IP address or DNS name of the host system to connect to. This parameter is mandatory.
File [file]
The remote file to download to the local system, optionally followed by the local filename of the downloaded file.
Examples for usage of runtime parameters
The following set of commands:
> sftposs -S '$TBA01' –oPort=2222 burgt@10.0.0.201
SFTPOSS client version T9999H06_17Apr2012_comForte_SFTPOSS_0092
Connecting to 10.0.0.201 via SSH2 process $TBA01 ...

HP NonStop SSH 544701-014 Specifications

General

Brand	HP
Model	NonStop SSH 544701-014
Category	Software
Language	English