EasyManua.ls Logo

HP NonStop SSH 544701-014

HP NonStop SSH 544701-014
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
316 Appendix HP NonStop SSH Reference Manual
LOG LEVEL EVENT TEXT / Description Variable Parts
<uint3>: Value of second highest byte of GSSAPI major status
<uint4>: GSSAPI major status
<uint5>: GSSAPI minor status
<uint6>: Highest byte of minor status
<uint7>: Value of second highest byte of GSSAPI minor status
<uint8>: Value of lowest 16Bit of GSSAPI minor status
10 <str1>: Error (GSS_C_GSS_CODE): <str2>
<str1>: Session Name
<str2>: GSSAPI error description for major status
10 <str1>: Error (GSS_C_MECH_CODE): <str2>
<str1>: Session Name
<str2>: GSSAPI error description for minor status
10 <str1>: received invalid request code
<str1>: Session Name
10 <str1>: received invalid request: <str2>
<str1>: Session Name
<str2>: Exception text
10 <str1>: received invalid request: unknown exception
<str1>: Session Name
10 Failed to obtain credentials for host service. Check your Kerberos installation.
10 GSS Error (major status): <uint1> [<uint2>/<uint3>/<uint4>] (<str1>)
<uint1>: GSSAPI major status
<uint2>: Value of highest byte of GSSAPI major status
<uint3>: Value of second highest byte of GSSAPI major status
<uint4>: GSSAPI major status
<str1>: GSSAPI error description for major status
10 Kerberos Error (minor status): <uint1> [<uint2>/<uint3>/<uint4>] (<str1>)
<uint1>: GSSAPI minor status
<uint2>: Highest byte of minor status
<uint3>: Value of second highest byte of GSSAPI minor status
<uint4>: Value of lowest 16Bit of GSSAPI minor status
<str1>: GSSAPI error description for minor status
10 Value '<chr1>' for GUARDIANATTRIBUTESEPARATOR not acceptable, using default '<chr2>'.
<chr1>: Separator
<chr2>: Comma
10 Value <str1> for SFTPEDITLINEMODE not a supported value.
<str1>: Value configured for parameter SFTPEDITLINEMODE
10 Value <int1> for SFTPEDITTABSIZE not acceptable, <str1>.
<int1>: Number of spaces replacing a TAB
<str1>: Error description
10 Value <str1> for SFTPEXCLUSIONMODEREAD not a supported value.
<str1>: Value configured for parameter SFTPEXCLUSIONMODEREAD

Table of Contents

Related product manuals