318 • Appendix HP NonStop SSH Reference Manual
LOG LEVEL EVENT TEXT / Description Variable Parts
10 <str1>: could not add HPSIM key: <str2>
<str1>: Session Name
<str2>: Exception text
10 Invalid runmode. SSH2 terminating.
10
Valid runmodes are CLIENT, DAEMON, SERVER (same as DAEMON), ADMIN, NOADMIN,
CLIENT_ADMIN, SERVER_ADMIN, DAEMON_ADMIN or ALL.
10 Failed to create private host key file <str1>
<str1>: Private key file name
10 Failed to write private host key to file <str1>
<str1>: Private key file name
10
Error loading private host key: <str1>. Possible mismatch of CUSTOMER setting between file creation and
file access.
<str1>: Exception text
10 Connection timed out.
10 Unexpected exception during initialization: <str1>
<str1>: Exception text
10 Unexpected exception in main wait loop: <str1>
<str1>: Exception text
10 <str1>: could not impersonate user <str2>, error <int1>
<str1>: Session name
<str2>: System user name
<int1>: Error
10 <str1>: user is mapped to a SAFEGUARD ALIAS
<str1>: Session name
10
<str1>: If SAFEGUARD is configured with PASSWORD-REQUIRED, start SSH2 with SAFEGUARD-
PASSWORD-REQUIRED TRUE
<str1>: Session name
10 <str1>: failed to create passive data connection tunnel from <str2> to <str3> (<str4>)
<str1>: Session Name
<str2>: Normalized originator host address and port
<str3>: Normalized target host address and port
<str4>: Description
10 Invalid state <int1> in FtpTunnelLayer::Notify, closing channel
<int1>: State
To Next Page
Loading...
