HP NonStop SSH 544701-014

HP NonStop SSH Reference Manual Appendix • 327
LOG LEVEL EVENT TEXT / Description Variable Parts
<str2>: Exception text
<str3>: Pseudo terminal name used for authentication
20 <str1>: Could not allocate PTY: <str2>
<str1>: Session Name
<str2>: Exception text
20 <str1>: forwarding from <str2> to <str3> denied, port forwarding not licensed
<str1>: Session Name
<str2>: Normalized originator host address and port
<str3>: Normalized target host address and port
20
<str1>: forwarding from <str2> to <str3> denied, ALLOWTCPFORWARDING or ALLOW-TCP-
FORWARDING for USER <str4> is FALSE
<str1>: Session Name
<str2>: Normalized originator host address and port
<str3>: Normalized target host address and port
<str4>: User name
20 <str1>: forwarding from <str2> to <str3> denied, only port 21 (target) or 20 (originator) allowed for FTP
<str1>: Session Name
<str2>: Normalized originator host address and port
<str3>: Normalized target host address and port
20 <str1>: listen request on <str2> denied, port forwarding not licensed
<str1>: Session Name
<str2>: Normalized address and port to bind
20 <str1>: forwarding from <str2> denied, only port 20 (originator) allowed for FTP data connections
<str1>: Session Name
<str2>: Normalized originator host address and port
20 <str1>: request rejected: user '<str2>' is not mapped to a SYSTEM-USER.
<str1>: Session Name
<str2>: User name
20 <str1>: session rejected: SSH2 not licensed for general usage.
<str1>: Session Name
20
Expected IPv6 address for parameter <str1> because IP mode is <str2> but found TCP/IPv4 address <str3>.
Using value <str4> instead.
<str1>: Parameter name
<str2>: TCP/IP mode
<str3>: Value configured for parameter
<str4>: Normalized interface address value
20
Expected IPv6 address for parameter <str1> because IP mode is <str2> but found IPv4 address <str3>. Using
value <str4> instead.
<str1>: Parameter name
<str2>: TCP/IP mode
<str3>: Value configured for parameter
<str4>: Normalized interface address value
20
Expected IPv4 address for parameter <str1> because IP mode is <str2> but found IPv6 address <str3>. Using