Troubleshooting and Maintenance 
Configuring the Computer 
178  Corporate Evaluator’s Guide 
Main Menu 
Setting Description  Default 
BIOS Revision  Shows the current BIOS version. 
Detected 
automatically. 
System Time 
Sets the time using 24-hour format. Values set take effect 
immediately. 
 
System Date 
Sets the date using dd/mm/yy format (except English, which 
uses mm/dd/yy format). 
 
Internal Hard Disk  Sets the hard disk drive type and various parameters. 
Detected 
automatically. 
Quiet Boot 
When enabled, hides summary of power-on self-test and 
messages during boot. 
Enabled 
Video Display Device 
Sets whether the built-in display automatically switches to an 
external display, if one is detected. 
Auto 
Video Expansion 
When enabled, the video image covers the entire display in 
lower resolution modes. When disabled, the video image is 
centered in the display. 
Disabled 
Primary Video Adapter 
Sets whether the computer automatically switches to an 
external video adapter connected to the docking system, if 
one is detected. 
Auto 
Television Type  
Controls the signal format (NTSC or PAL) output by the 
S-video port when Windows is not running. 
NTSC 
System Memory  Shows the system memory size.  640 KB 
Extended Memory  Shows the extended memory size. 
Detected 
automatically. 
Unique Dock ID 
Sets whether the computer creates a unique hardware profile 
for each dock (Enabled) or uses a common profile for all 
docks (Disabled). 
Enabled 
UUID 
Displays the value of the 16-byte UUID (Universally Unique 
ID) as 32 hex characters. 
Detected 
automatically