Add-On Devices
Connecting PC Cards
Corporate Evaluator’s Guide 79
Connecting PC Cards
The computer’s PC Card slots are available for storing data and expanding the
communication capabilities of the computer. The computer supports standard Type I, II,
and III PC Cards (PCMCIA and CardBus), and can hold two Type I or II cards or one
Type III card.
The lower slot supports Zoomed Video, which allows a zoomed video card to show high-
quality multimedia presentations.
To insert or remove a PC Card
Inserting a PC Card
1. Hold the PC Card with its face up and its connector holes toward the card slot.
2. Slide the PC Card all the way into the slot. Most cards are properly seated when the
outer edge is flush with the casing of the computer, but some cards are designed to
protrude from the case.
To Next Page
Loading...
