HP ProCurve 2810 Series User Manual

Interface Access and System Information
System Information
Web: Configuring System Parameters
In the web browser interface, you can enter the following system information:
■ System Name
■ System Location
■ System Contact
For access to the MAC Age Interval and the Time parameters, use the menu
interface or the CLI.
Configure System Parameters in the Web Browser Interface.
1. Click on the Configuration tab.
2. Click on
System Info.
3. Enter the data you want in the displayed fields.
4. Implement your new data by clicking on Apply Changes.
To access the web-based help provided for the switch, click on
[?] in the web
browser screen.
7-16

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply