HP ProCurve 2810 Series User Manual

E
Daylight Savings Time on ProCurve Switches
Configuring Daylight Savings Time
This information applies to the following ProCurve switches:
• 2510
• 3400cl
• 1600M
• ProCurve
• 2512
• 4108gl
• 2400M
AdvanceStack
• 2524
• 4104gl
• 2424M
Switches
• 2626
• 6108
• 4000M
• ProCurve
AdvanceStack Routers
• 2650
• 5304xl
• 8000M
• 2626-PWR
• 5308xl
• 212M
• 2650-PWR
• 224M
• 2810
• 2824
• 2848
ProCurve switches provide a way to automatically adjust the system clock for
Daylight Savings Time (DST) changes. To use this feature you define the
month and date to begin and to end the change from standard time. In addition
to the value "none" (no time changes), there are five pre-defined settings,
named:
■ Alaska
■ Canada and Continental US
■ Middle Europe and Portugal
■ Southern Hemisphere
■ Western Europe
The pre-defined settings follow these rules:
Alaska:
• Begin DST at 2am the first Sunday on or after April 24th.
• End DST at 2am the first Sunday on or after October 25th.
E-1

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply