Port Status and Basic Configuration
Viewing Port Status and Configuring Port Parameters
ProCurve# show interface brief
Status and Counters - Port Status
| Intrusion Flow Bcast MDI
Enabled Status Mode Mode
Current Operating Mode
Port Type | Alert Ctrl Limit
----- --------- + --------- ------- ------ ---------- ----- ----- ------
1 100/1000T | No Yes Down 1000FDx MDIX off 0
2 100/1000T | No Yes Down 1000FDx MDIX off 0
3 100/1000T | No Yes Down 1000FDx MDI off 0
4 100/1000T | No Yes Down 1000FDx MDI off 0
5 100/1000T | No Yes Down 1000FDx MDIX off 0
6 100/1000T | No Yes Down 1000FDx MDI off 0
7 100/1000T | No Yes Down 1000FDx MDI off 0
8 100/1000T | No Yes Down 1000FDx MDIX off 0
9 100/1000T | No Yes Down 1000FDx MDIX off 0
10 100/1000T | No Yes Down 1000FDx MDIX off 0
Figure 10-5. Example Show Interface Brief Command Listing
ProCurve# show interface config
Port Settings
Port Type | Enabled Mode
----- --------- + ------- ------------ --------- ----
1 100/1000T | Yes Auto Disable Auto
2 100/1000T | Yes Auto Disable Auto
3 100/1000T | Yes Auto Disable Auto
4 100/1000T | Yes Auto Disable Auto
5 100/1000T | Yes Auto Disable Auto
6 100/1000T | Yes Auto Disable Auto
7 100/1000T | Yes Auto Disable Auto
8 100/1000T | Yes Auto Disable Auto
9 100/1000T | Yes Auto Disable Auto
10 100/1000T | Yes Auto Disable Auto
Flow Ctrl MDI
Current Configured Mode
Figure 10-6. Example Show Interface Config Command Listing
Displaying Spanning Tree Configuration Details
To view detailed statistics on spanning tree operation for different ports, use
the show spanning-tree command.
Syntax: show spanning-tree <port-list> detail
Lists 802.1D and 802.1w port operating statistics for all ports,
or those specified.
10-9
To Next Page
Loading...
