HP ProCurve 2810 Series User Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Advanced Management: RMON
The switches covered in this guide support RMON (Remote Monitoring) on
all connected network segments. This allows for troubleshooting and
optimizing your network. The following RMON groups are supported:
■ Ethernet Statistics (except the numbers of packets of different frame
sizes)
■ Alarm
■ History (of the supported Ethernet statistics)
■ Event
The RMON agent automatically runs in the switch. Use the RMON
management station on your network to enable or disable specific RMON
traps and events.
12-24

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply