To Next Page

To Previous Page

Using the Web Browser Interface

Status Reporting Features

Figure 5-11. Display of Numerical Values for the Bar

Port Status

Port Status Indicators

Legend

Figure 5-12. The Port Status Indicators and Legend

The Port Status indicators show a symbol for each port that indicates the

general status of the port. There are four possible statuses:

■ Port Connected – the port is enabled and is properly connected to an

active network device.

■ Port Not Connected – the port is enabled but is not connected to an

active network device. A cable may not be connected to the port, or the

device at the other end may be powered off or inoperable, or the cable or

connected device could be faulty.

■ Port Disabled – the port has been configured as disabled through the

web browser interface, the switch console, or SNMP network manage-

ment.

■ Port Fault-Disabled – a fault condition has occurred on the port that

has caused it to be auto-disabled. Note that the Port Fault-Disabled

symbol will be displayed in the legend only if one or more of the ports is

in that status. See appendix B, “Monitoring and Analyzing Switch Opera-

tion” for more information.

5-19

Other manuals for HP ProCurve 2810 Series

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2810 Series and is the answer not in the manual?

General