To Next Page

To Previous Page

Monitoring and Analyzing Switch Operation

Status and Counters Data

CLI Access for MAC Address Views and Searches

Syntax: show mac-address

[vlan < vlan-id >]

[ethernet]< port-list >]

[< mac-addr >]

To List All Learned MAC Addresses on the Switch, with The Port

Number on Which Each MAC Address Was Learned.

ProCurve> show mac-address

To List All Learned MAC Addresses on one or more ports, with Their

Corresponding Port Numbers. For example, to list the learned MAC

address on ports A1 through A4 and port A6:

ProCurve> show mac-address a1-a4,a6

To List All Learned MAC Addresses on a VLAN, with Their Port

Numbers. This command lists the MAC addresses associated with the ports

for a given VLAN. For example:

ProCurve> show mac-address vlan 100

Note The switch operates with a multiple forwarding database architecture. For

more on this topic, refer to “Duplicate MAC Addresses Across VLANs” on page

C-21.

To Find the Port On Which the Switch Learned a Specific MAC

Address. For example, to find the port on which the switch learns a MAC

address of 080009-21ae84:

Figure B-11. List the Port on which the Switch Deleted a MAC Address

B-16

Other manuals for HP ProCurve 2810 Series

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2810 Series and is the answer not in the manual?

General