HP ProCurve 2810 Series User Manual

Using the Menu Interface
Where To Go From Here
Where To Go From Here
This chapter provides an overview of the menu interface and how to use it.
The following table indicates where to turn for detailed information on how
to use the individual features available through the menu interface.
Option: Turn to:
To use the Run Setup option Refer to the Installation and Getting Started Guide
shipped with the switch.
To use the ProCurve Stack Manager See the chapter on stack management in the
Advanced Traffic Management Guide.
To view and monitor switch status and Appendix B, “Monitoring and Analyzing Switch
counters Operation”
To learn how to configure and use Refer to the Access Security Guide for your
passwords and other security features switch.
To learn how to use the Event Log “Using Logging To Identify Problem Sources” on
page C-23
To learn how the CLI operates Chapter 4, “Using the Command Line Interface
(CLI)”
To download software (the OS) Appendix A, “File Transfers”
For a description of how switch “Switch Memory and Configuration” on page 6-1
memory handles configuration
changes
For information on other switch See the Table of Contents at the front of this
features and how to configure them manual.
3-15

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply