To Next Page

To Previous Page

Getting Started

Conventions

■ Braces ( < > ) enclose required elements.

■ Braces within square brackets ( [ < > ] ) indicate a required element

within an optional choice.

■ Boldface indicates use of a CLI command, part of a CLI command

syntax, or other displayed element in general text. For example:

“Use the copy tftp command to download the key from a TFTP server.”

■ Italics indicate variables for which you must supply a value when

executing the command. For example, in this command syntax, < port-

list > indicates that you must provide one or more port numbers:

Syntax: aaa port-access authenticator < port-list >

Command Prompts

In the default configuration, your switch displays one of the following CLI

prompts:

ProCurve Switch 2810#

To simplify recognition, this guide uses ProCurve to represent command

prompts for all models. For example:

ProCurve#

(You can use the hostname command to change the text in the CLI prompt.)

Screen Simulations

Figures containing simulated screen text and command output look like this:

ProCurve(config)# show version

Image stamp: /sw/code/build/bass(ppne_swt)

Mar 17 2006 11:44:02

N.10.XX

2624

Boot Image: Primary

Build Options: QA

atchdog: ENABLED

Figure 1-1. Example of a Figure Showing a Simulated Screen

1-3

Other manuals for HP ProCurve 2810 Series

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2810 Series and is the answer not in the manual?

General