HP ProCurve 2810 Series User Manual

Troubleshooting
Chassis Over-Temperature Detection
■ If there are no fan failures, ensure that the ambient temperature in the
switch’s operating area is not causing the over-temperature condition. If
the condition persists, remove power from the switch until you can find
the cause and apply an effective remedy.
C-6

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply