HP ProCurve Switch 2650 User Manual

184 pages

To Next Page

To Previous Page

3-23

RADIUS Authentication and Accounting

Viewing RADIUS Statistics

General RADIUS Statistics

Figure 3-10. Example of General RADIUS Information from Show Radius Command

Figure 3-11. RADIUS Server Information From the Show Radius Host Command

Syntax: show radius [ host < ip-addr >]

Shows general RADIUS configuration, including the

server IP addresses. Optional form shows data for a

specific RADIUS host. To use show radius, the server’s IP

address must be configured in the switch, which.

requires prior use of the radius-server host command.

(See “Configuring RADIUS Accounting” on page 3-16.)

!FishSecurity.book Page 23 Thursday, October 10, 2002 9:19 PM

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve Switch 2650 and is the answer not in the manual?

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	Layer 2
Form Factor	Rack-mountable
Flash Memory	8 MB
Jumbo Frame Support	Yes
Power Supply	Internal
Management	Web, CLI, SNMP
Features	VLAN support, IGMP snooping, QoS
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% (non-condensing)
Ports	48 x 10/100
MAC Address Table Size	8, 000 entries