HP ProCurve Switch 2650 User Manual

7-5
Using Authorized IP Managers
Defining Authorized Management Stations
rized Manager IP address to authorize four IP addresses for management
station access. The details on how to use IP masks are provided under
“Building IP Masks” on page 7-9.
Note The IP Mask is a method for recognizing whether a given IP address is
authorized for management access to the switch. This mask serves a different
purpose than IP subnet masks and is applied in a different manner.
Menu: Viewing and Configuring IP Authorized
Managers
From the console Main Menu, select:
2. Switch Configuration . . .
7. IP Authorized Managers
Figure 7-1. Example of How To Add an Authorized Manager Entry
1. Select Add to add an authorized manager
to the list.
!FishSecurity.book Page 5 Thursday, October 10, 2002 9:19 PM

HP ProCurve Switch 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	Layer 2
Form Factor	Rack-mountable
Flash Memory	8 MB
Jumbo Frame Support	Yes
Power Supply	Internal
Management	Web, CLI, SNMP
Features	VLAN support, IGMP snooping, QoS
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% (non-condensing)
Ports	48 x 10/100
MAC Address Table Size	8, 000 entries