4-9
Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Configuring the Switch for SSH
Operation
1. Assigning Local Operator and Manager Passwords
At a minimum, HP recommends that you always assign at least a Manager
password to the switch. Otherwise, under some circumstances, anyone with
Telnet, web, or serial port access could modify the switch’s configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
Syntax: password < manager | operator | all >
SSH-Related Commands in This Section Page
show ip ssh 4-17
show ip client-public-key [< babble | fingerprint >] 4-24
show ip host-public-key [< babble | fingerprint >] 4-14
show authentication 4-20
crypto key < generate | zeroize > [rsa] 4-11
ip ssh 4-16
key-size < 512 | 768 | 1024 > 4-16
port < 1 - 65535 > 4-16
timeout < 5 .. 120 > 4-16
aaa authentication ssh
login < local | tacacs | radius | rsa > 4-18, 4-19
< local | none > 4-18
enable < tacacs | radius | local > 4-18
< local | none > 4-18
copy tftp pub-key-file <tftp server IP> <public key file>4-24
clear public key 4-25
!FishSecurity.book Page 9 Thursday, October 10, 2002 9:19 PM
To Next Page
Loading...
Need help?
General
