HP ProCurve Switch 2650 User Manual

3-25
RADIUS Authentication and Accounting
Viewing RADIUS Statistics
RADIUS Authentication Statistics
Figure 3-12. Example of Login Attempt and Primary/Secondary Authentication
Information from the Show Authentication Command
Figure 3-13. Example of RADIUS Authentication Information from a Specific Server
Syntax: show authentication
Displays the primary and secondary authentication
methods configured for the Console, Telnet, Port-Access
(802.1x), and SSH methods of accessing the switch. Also
displays the number of access attempts currently
allowed in a session.
show radius authentication
Displays NAS identifier and data on the configured
RADIUS server and the switch’s interactions with this
server. (Requires prior use of the radius-server host com-
mand to configure a RADIUS server IP address in the
switch. See “Configuring RADIUS Accounting” on page
3-16.)
!FishSecurity.book Page 25 Thursday, October 10, 2002 9:19 PM

HP ProCurve Switch 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	Layer 2
Form Factor	Rack-mountable
Flash Memory	8 MB
Jumbo Frame Support	Yes
Power Supply	Internal
Management	Web, CLI, SNMP
Features	VLAN support, IGMP snooping, QoS
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% (non-condensing)
Ports	48 x 10/100
MAC Address Table Size	8, 000 entries