xiii
Getting Started
Related Publications
Figure 1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden-
tification. For example:
HPswitch(config)# clear public-key
HPswitch(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Related Publications
Product Notes and Software Update Information. The Read Me First
shipped with your switch provides software update information, product
notes, and other information. A printed copy is shipped with your switch. For
the latest version, refer to “Getting Documentation From the Web” on page xv.
Installation and Getting Started Guide. Use the Installation and Get-
ting Started Guide shipped with your switch to prepare for and perform the
physical installation. This guide also steps you through connecting the switch
to your network and assigning IP addressing, as well as describing the LED
indications for correct operation and trouble analysis. A PDF version of this
guide is also provided on the Product Documentation CD-ROM shipped with
the switch. And you can download a copy from the HP Procurve website. (See
“Getting Documentation From the Web” on page xv.)
Management and Configuration Guide. Use the Management and Con-
figuration Guide for information on:
Using the command line interface (CLI), Menu interface, and web browser
interface
Learning the operation and configuration of all switch software features
other than the access security features included in this guide
Troubleshooting software operation
HP provides a PDF version of this guide on the Product Documentation
CD-ROM shipped with the switch. You can also download the latest copy from
the HP Procurve website. (See “Getting Documentation From the Web” on
page xv.)
!FishSecurity.book Page xiii Thursday, October 10, 2002 9:19 PM
To Next Page
Loading...
Need help?
General
