HP ProCurve Switch 2650 User Manual

xvi
Getting Started
Sources for More Information
Sources for More Information
 If you need information on specific parameters in the menu interface,
refer to the online help provided in the interface.
 If you need information on a specific command in the CLI, type the
command name followed by “help”. For example:
 If you need information on specific features in the HP Web Browser
Interface (hereafter referred to as the “web browser interface”), use the
online help available for the web browser interface. For more information
on web browser Help options, refer to the Management and Configura-
tion Guide for your switch.
 If you need further information on Hewlett-Packard switch technology,
visit the HP Procurve website at:
http://www.hp.com/go/hpprocurve
Online Help
for Menu
!FishSecurity.book Page xvi Thursday, October 10, 2002 9:19 PM

HP ProCurve Switch 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	Layer 2
Form Factor	Rack-mountable
Flash Memory	8 MB
Jumbo Frame Support	Yes
Power Supply	Internal
Management	Web, CLI, SNMP
Features	VLAN support, IGMP snooping, QoS
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% (non-condensing)
Ports	48 x 10/100
MAC Address Table Size	8, 000 entries